The cool leather machine is not only good quality when buying, it is good, more important, it should pay attention to maintenance in the later stage. Xiaobian has also seen the cool leather machine used for three or four years. The machine is similar to the new one. The key is the customer maintenance, usually When not in use, it will be cleaned up and packaged, and it will be put into use again in the coming year. Today we will see how to do the maintenance of the cool leather machine. How to clean the cool skin machine?
Detox Hawthorn, Slim Hawthorn, Hawthorn Lose Weight GUANGZHOU XIANGGUO BIO-TECHNOLOGY CO., LTD. , http://www.slimmanufacturer.com
Bearing parts: Bearings are very important for a cool skin machine. In the maintenance of bearings, it is necessary to pay attention to frequent oil maintenance, increase the degree of lubrication and prevent wear, generally based on butter.
Check the belt regularly: Mainly pay attention to the tightness of the belt inspection. Too loose is not good for the operation of the machine. At this time, pay attention to adjustment to prevent other situations;
Heater maintenance: The heater needs to be inspected regularly. If leakage or other conditions are found, it is recommended that the customer replace the heating ring to prevent the machine from being too worn and injuring other parts;
Note that during the maintenance of the cool leather machine, all cleaning work should be checked after the power is turned off. 
