Corn stalk pellet feed processing technology

The corn stalks are dried after being crushed, and then the additives are added and mixed uniformly. The granules are pelletized and pressed into a pellet feed in a pellet feed machine. Due to the friction and heating during the processing, the inside of the straw is deeply matured, and the processed feed pellets are smooth, moderate in hardness, and uniform in size, and the diameter of the pellet can be adjusted between 3-12mm as needed. It can also use pellet feed equipment to complete straw crushing, lifting, stirring and feeding functions, adding various additives at any time, completely closed production, and a high degree of automation. Small and medium-sized corn stalk pellet feed processing enterprises should use this technology . In addition, there is also a complete processing and production technology for straw concentrate feed that is suitable for large-scale feed production enterprises, and its level of automation is higher.

We can customize different size bale net for you to fit any sized bale.

If your bale size is 4` high by 5` wide then you need a MEDIUM SIZED NET that measures 5` x 7`.

If your bale size is 5` high by 6` wide then you need a LARGE SIZED NET that measures 6` x 8`.


bale net for baler

1.23m Width Bale Wrap Netting

1.23m Width*3000m(4') bale wrap netting, silage bale net, corn wrap netting

Zibo Maoyang Industry and Trading Co.,ltd , http://www.mysilage.com