Jianlan breeding and cultivation techniques

I. Breeding 1. The choice of pots is rough texture, no upper shaft, porous bottom, and potted orchids are better. It is most economical to produce thin plastic soft pots in batch production. The sales promotion of orchids is based on high simplicity and small pots so that they can be placed in an elegant pot display. 2. The mixture of planting materials should be selected from the following: loose texture, good structure, rich organic matter, good air permeability, strong drainage performance, favorable to aerobic microbial activity, and enhanced symbiosis of orchids. The following mixed plant materials can be used: Humus 40 %, Burnt earth 40%, Coarse grain 20%; Mushroom mud 30%, Fire earth 30%, Coarse grain 25%, Gluten 15%; Humus 40%, Coarse grain 40%, Gluten 20% . 3. Planting of orchids (1) After the seedlings have treated the orchids, they wash the sediments on the root colonies, remove the leafless pseudobulbs, and cut off the diseased leaves and decayed roots. Before planting, seedlings can be immersed with thiophanate or can be diluted 2000 times to dilute for half an hour, then rinse clean water, rinse, put in ventilated place, cool dry water to be planted. (2) Planting plants can only be planted in the center of the pot with only 1-2 plexuses. The multiple plants in the pot should face the old strains of each culm, and the new plant toward the rim, in order to increase the germination rate and growth and development space of the new strains. When planting, put the roughest plant material into the pot until the height of the pot is 15%. After putting in the blue plant, we should evenly disperse the root group. Beware of Langen's folding and slowly fill in the fine plant material until the pot height reaches 95%. The shaking is applied to make the fine planting material tightly integrated with the orchid root. The height of the fine planting material in the blue pot is about 90%, so that when watering, the blue plant base (pseudo-bulb) is bare on the surface of the pot, making it more likely to acquire nature. Light and fresh air. Second, maintenance and management 1, control light cooling Jianlan growth suitable for the average annual temperature of 15-23 °C, summer temperatures are hot, with 70-80% of plastic shading network to cool. 2, high temperature and reduce the temperature caused by excessive light, should increase the level and density of shade to promote cooling; summer and autumn, strong light, hot air, high temperatures, doors and windows should be opened, so that the blue air completely convection, prompting Cool down. Spraying fresh water under the channel and blue shelf and spraying water mist into the indoor space can also promote cooling. 3, moisturizing Ventilation Blue field moisturizing and ventilation should be regulated to a most reasonable state, to grow orchids. To maintain air humidity, advanced automatic humidifiers can be used to spray water mist into spaces, channels, and blue racks. The humidity of the substrate should be controlled according to the light, humidity, ventilation and other conditions. There are soil-cultivated 2-4 days pouring a water, adhere to "Ning Gan not wet," the time limit of watering to local conditions. Wild orchids are native to the valleys of mountains and mountains. They are open on all sides, but they are shaded by forests and grasses. They are often windy and windy. They can grow in a fresh air environment for a long time. Therefore, orchids also need to create conditions for the growth of these orchids. Open doors and windows to promote air convection. 4. Insulation and antifreeze Jianlan can only tolerate transient, intermittent -2 to -5°C low temperatures under protective conditions that block wind and frost. Therefore, greenhouse insulation should be provided in winter, and heating equipment can be used if conditions permit. . 5, fertilization to adopt "in the blue system should be appropriate, see seedlings fixed fertilizer, rather light not thick, timely thin application." That is, according to the blue species, seedling potential, physiological characteristics, grasp the timing. Dry fertilizers were: cattle bone meal (nitrogen 4%, phosphorus 22.06%), plant ash (phosphorus 1.04%, potassium 6.41%), cake fertilizer (nitrogen 7%, phosphorus 1.32%, potassium 2.12%) and fire-soil mixed fertilizer preparation and compounding Fertilizers are used no less than 4 times per year in alternate pots. The liquid manure is filtered with a decomposed organic fertilizer, and the urea, potassium dihydrogen phosphate, or special fertilizer is alternately used as top dressing or root dressing. It is usually applied every 15 days. Before and after spraying the roots, the leaves are sprayed with clean water once or twice. Dust, liquid residue. Fertilization time is: 1 germination (late spring and early summer): dry fertilizer one or two times, once a day outside the root fertilizer for 10 days, mainly nitrogen and potassium fertilizers, promote the shoots and leaves of the shoots, underground root expansion. 2Development of fertilizers (late summer and early autumn): Sprout leaves grow out of leaves, promote new shoots and strong, mainly nitrogen, ground thin application, sprouts after opening the leaves to promote strong seedlings, weekly potassium phosphate spray Shi once. 3 to promote flower fat: When the new shoots no longer grow when the flower buds into the differentiation period, mainly phosphorus, dry fertilizer twice, once a week root fertilization. 4 During late autumn and early winter, the orchids will go into dormancy during the period from cold dew to beginning of winter, dry fertilizer once, liquid fertilizer twice, and foliar spray once every 10 days to ensure safe wintering.

Ziprasidone Intermediates
Ziprasidone is a medication of the atypical antipsychotic type. It is used for the treatment of schizophrenia as well as acute mania and mixed states associated with bipolar disorder. Its intramuscular injection form is approved for acute agitation in people with schizophrenia. Ziprasidone is also used off-label for depression, bipolar maintenance, and posttraumatic stress disorder.
Ziprazidone is approved by the U.S. Food and Drug Administration (FDA) for the treatment of schizophrenia as well as acute mania and mixed states associated with bipolar disorder. Its intramuscular injection form is approved for acute agitation in schizophrenic patients for whom treatment with just ziprasidone is appropriate.
We produce a series of complete intermediates for Ziprasidone, intermediate I (CAS No. 2634-33-5) and intermediate II (CAS No. 7716-66-7) etc.

All of our products are with stable production and strict quality control, making sure your experience with Sunshine Biotech is always enriching, satisfying and fulfilling.

Pharmaceutical Intermediates

Ziprasidone Intermediates

Ziprasidone Intermediates,Cas 7716-66-7 ,Cas 2634-33-5,Ziprasidone Hydrochloride Intermediate

Nanjing Sunshine Biotech Co., Ltd , http://www.sunshine-bio.com