1. When the centrifuge is in the pre-cooling state, the centrifuge lid must be closed. After the centrifugation is finished, the rotor should be placed on the test bench, and the residual water in the chamber should be dried. The centrifuge lid is open. 7. In the event of machine failure during the use of the instrument, contact the technician in time for damage to the component. White Garlic,caulk white garlic,Best White Garlic,White Garlic For Sale shandong changrong international trade co.,ltd. , https://www.cragriculture.com
Second, the centrifuge rotor head can be placed on the platform of the centrifuge when pre-cooling, or placed on the test bench, must not be screwed on the rotor, because once the start, the rotor The cover will fly out, causing an accident!
3. After the screw cap is tightened, be sure to touch the gap between the rotor and the cover with your fingers. If there is a gap, unscrew and retighten until the gap is confirmed before the centrifuge can be started.
4. During the centrifugation process, the operator must not leave the centrifuge room. If an abnormal situation occurs, the operator cannot turn off the power supply.) Press STOP. Fill in the centrifuge usage record before pre-cooling.
Â
5. Do not use fake centrifuge tubes, and do not use aging, deformed or cracked centrifuge tubes.
6. Can leave after the last routine safety check using a centrifuge on holidays and evenings.