Hospital/Clinic/Drugstore Equipment Lightweight Wheelchair,Folding Wheelchair,Manual Wheelchair,Portable Wheelchair Surgimed Medical Supplies Co.,Ltd , http://www.surgimedcn.com
Main technical parameters Overall dimensions mm Working status 4600, 2 100, 780
Non-working 3400, 2100, 780
Machine quality kg 384
Track length 2000
Ground clearance mm 200
Loading mass kg 800
(From "Agricultural Machinery" 2005, 10 (Wang Jiliang Jin Sheng)
7CC-2 push-pull retractable bale transporter
7CC-2 type push-pull retractable bale transporter is a kind of transport vehicle for timely pulling away the bales tied into the round tie baling machine (grass bales and cultivating the trenches and cultivating the trenches as early as possible). The vehicle is hooked behind the bottom shaft of the round baler. The lower edge of the baling machine baling mouth is in the same horizontal position as the bottom plate of the bale transporter and forms a combined unit with the baler. When the baler is in operation, the formed bale is manually pushed from the baler onto the transporter, and when the baler is fully loaded, the bale is removed and the next cycle is performed. The use of this vehicle can avoid the phenomenon of pressure, treading, and grinding on the seedlings of interplanting crops when straw bales are unloaded in the field, causing the bales and straws to be transported and artificially loaded. The car has low ground clearance and good job stability. The length of the car body can be adjusted within 3400-4600mm, and the working state can be adjusted to the longest size. Two bundles of bales with a diameter of 160cm and a length of 120cm can be installed in the car.