Fruit trees bagging sequence, you know?

As for the order of a bagging, the upper part is set first and the lower part is set at the rear; the inner sleeve is set first, and the outer sleeve is set at the periphery to avoid touching the fruit. Bagging should be performed piece by piece for easy management. Every effort should be made to overcome the tendencies of seeing the fruits, and the young fruits with tight fruit shape, tight locks, and well-developed fruit should be carefully selected. The fruits used for bagging should be single fruits, center fruits, and drooping fruits.

We must also pay attention to the outer tip of fruit, the back of the sky, the top of the canopy, and the bottom ground fruit. Promote the whole park, whole tree bagging; good fruit sets a good bag, poor fruit set bad bag. As long as the entire garden bagging ability to reduce the number of fight drugs, decreased production costs. In the later period of growth, if the bag is damaged or exposed, the bag should be changed in time, and the bag should be changed afterwards.

Before bagging, put the whole bag of fruit in a moist place in advance to make the bag mouth moist and softened. When the sleeve is opened, the bag is stretched by hand to make it swell. Open the ventilation holes at the bottom corners to prevent the paper bag from scorching on the fruit surface. Then open it longitudinally downward and put the young fruit into the bag, so that the handle is set. Open the base in the longitudinal direction. The young fruit is hung in the bag, do not put the blade and the auxiliary tip into the bag, then fold the bag mouth horizontally, and finally the zha wire at the mouth of the bag is changed into a “V” shape to clamp the bag mouth.

When operating, be sure to avoid young fruit tightly attached to the paper bag (need to leave space between the sunny side of the paper bag and young fruit) to form sunburn; Second, ensure that the bag is tightly packed, try not to leave empty space, and avoid rain and pests entering the bag Third, we must pay attention to the fact that Zhas can not be twisted on the handle, but should be sandwiched on a paper bag laminate (or tied on a fruit branch) so as not to hurt the handle and form a fruit drop.

Disclaimer: Some articles in this website have been transferred from the Internet. If there is a third party's legal rights, please inform this website. phone

IBP Transducer

Consistent and accurate readings during blood pressure monitoring


Consistent and accurate readings during blood pressure monitoring.
High durometer pressure tubing ensures optimal dynamic response.
The convenient snap-tap flush device designed for easy priming and
square-wave testing.
Multiple standard configuration, adult and neonatal/pediatric.
Versatile, dual function snap tab allows dynamic response testing.
3cc or 30cc per hour flow rates with dual function flush device.
6 connectors match most monitors and single, double, triple lumens are
options.
Administration sets pre-connected to the IBP Transducer sets
Sterile and individually packaged.
ISO, CE & FDA 510K

Ibp Transducer,Ibp Interface Cable,Double Line Ibp Transducer,Invasive Blood Pressure Transducer

Zhejiang Haisheng Medical Device Co., Ltd , https://www.hisernmedical.com